What you will need:
-A Piece of Cloth
(In my case I found an old tube top)
-Scissors
-Thread
-Needle
Then cut two even strips (thickness should be about 5 inches thick)
Once cut, stretch the fabric so the ends curl
Loop the two pieces together
Make sure to adjust & measure it, and cut off access cloth if necessary.
Then sew the ends together.
TADA!!.....your very own turban
This was so simple it took me only about 15 minutes.
You can also add embellishments, such as pearls or rhinestones, to give it a little personal flare.
xoxo
No comments:
Post a Comment